- Help
- Leather features
Stitch lines
A stitch line is a row of holes along the edges you sew, set in from the edge and spaced for your chisel. When you change the part, the holes follow.
Add a stitch line
- Pick Stitch (S).
- Click each side you want to sew. Click from inside the part to put the holes inside it. The holes show as a preview, and each side shows how many stitches it gets.
- Set the spacing, the distance from the edge and the hole shape in the panel. The preview follows.
- Click Commit (Enter), press Enter, or click an empty spot on the canvas.
- Shift-click a picked side to take it out again.
- After the first side, drag a box on empty space to add every side inside it.
- Pick every side of an outline for one closed row all the way round.
- Pick sides of two parts that meet, such as a gusset and its panel, for one row that runs through both.
Esc clears the sides you picked; press it again to put the tool away. Nothing is added until you commit.
The stitch panel
- Preset
- Sets the spacing and the hole for a common chisel in one go. See Chisel presets.
- Edge inset (mm)
- How far the row of holes sits in from the edge. 0 puts the holes on the line itself.
- Inset at start (mm) and Inset at end (mm)
- Where a row stops beside a side you are not sewing: how far its last hole is from that side. Shown only for a row with ends. See Where a row ends.
- Spacing (mm)
- From one hole to the next: your chisel’s prong spacing. 3.38 and 4 set the most common sizes.
- Mode
- How the holes are spread along each side: Walking, Balancing or Fitting. See Stitch spacing and corners.
- Shape
- Round holes for an awl or a punch, slits for a French chisel, or diamonds for a diamond chisel.
- Hole Ø (mm)
- The diameter of a round hole.
- Length, Width and Angle (°)
- The size of a slit or diamond and how far it is slanted from the row, as your chisel’s prongs are.
- Name
- Optional, to tell rows apart in the Layers list.
The panel’s first line counts the holes, and Stitch line length shows how long the row is. Spacing, hole sizes and insets are always in millimetres, as chisels are sized.
Chisel presets
Pick your chisel under Preset to set its spacing and hole shape at once:
- Diamond chisels
- 2.7mm Diamond, 3.0mm Diamond, 3.38mm Diamond, 3.85mm Diamond
- French chisels
- 2.7mm French Slit, 3.0mm French Slit, 3.38mm French Slit, 3.85mm French Slit, 7 SPI French Slit
- Round holes
- 1mm Round @ 4mm
Your own chisel: set the spacing and the hole, click Save current as preset... and give it a name. It is listed under Saved in the presets, in this browser, or in your account when you are signed in.
New stitch lines start with the settings you last committed, so set up your chisel once and keep stitching.
Change a stitch line
Click a stitch line, with Select or Stitch, to open it in the panel. Every change shows at once; undo puts it back. Click more sides to add them to the row, Shift-click to take them out, then commit.
- Press Backspace while a stitch line is open to delete it.
- Click the number on any side to switch between the stitch count and the stitched length.
- Move, resize or reshape the part and its holes are laid out again. Deleting a part deletes its stitch lines.
Free stitch lines
For stitching that does not follow an edge, such as a decorative row or the line of a pocket on a panel, drag on empty space with Stitch. The line is added when you let go and opens in the panel.
- Drag a square end handle to move that end.
- Drag the round middle handle to bend the line into a curve; drag it back to straighten it.
- Drag the line itself to move it. Hold Shift to move it off the grid.
- Type an exact Length (mm) and Angle (°) in the panel.
A free stitch line has holes at both its ends, and is listed in Layers as a stitch row. Select it like a part to move, copy or group it.
Something missing or unclear? Write to support@easypatt.com and it gets fixed.